SynchroGrid performed a wide area coordination study to ensure compliance with PRC-027-1 Requirement 2.

SynchroGrid performed a wide area coordination for CTT’s 345kV system.

SynchroGrid replaced GE-T60 reactor relays with SEL-387E relays and upgraded SEL 487E-0 reactor relays with SEL-487E-3 relays.

SynchroGrid upgraded SEL 487E-0 Reactor relays with SEL-487E-3 relays.

SynchroGrid conducted a generator NERC-PRC-025-2 compliance review for NRG. 

SynchroGrid provided relay setting and relay coordination services for a local  substation.

SynchroGrid provided relay setting development services for a local substation.

SynchroGrid performed an arc flash analysis on the electrical distribution system for a wind farm operated by Pattern Energy.

SynchroGrid performed an arc flash analysis on the electrical distribution system for South Kent Wind Farm - a wind farm operated by Pattern Energy.

SynchroGrid developed relay settings to replace reactor relays (GE-T60 and SEL-487E-0 were replaced with SEL-387E and SEL-487E-3) and updated drawings, control schematics, and GOOSE architect files to coordinate communications.

SynchroGrid performed engineering calculations for a number of Pattern wind farms in Ontario.

SynchroGrid provided relay settings for a local substation.

SynchroGrid developed relay settings and provided relay coordination services for a local substation.

SynchroGrid provided relay setting and relay coordination services for a local substation. 

SynchroGrid performed an arc flash analysis for Pattern Energy.

SynchroGrid provided an analysis of the operation of a 345kV bus trip. 

SynchroGrid provided relay setting development services to upgrade two retrofit transformer panels.

SynchroGrid performed engineering calculations for Sharyland Utilities’ Tule Canyon Substation to verify that relay and limiter settings were in compliance with NERC PRC-019-2.

SynchroGrid performed engineering calculations for Sharyland Utilities to verify that the relay and limiter settings at the Alibates Substation were in compliance with NERC PRC-019-2.

SynchroGrid performed engineering calculations to verify that relay settings are in compliance with PRC-025-1 for Pattern Energy wind farms located in the US.

SynchroGrid developed relay settings for transformer protection, bus protection, and feeder protection at a local substation. Relay coordination was also provided for the transformer and distribution feeder.

SynchroGrid developed extensive relay settings as well as relay coordination for a local substation. 

SynchroGrid replaced a distribution transformer and a relay panel at the BTU Nall Lane substation. 

SynchroGrid provided relay settings services for the entire 138 : 12.47kV Substation. 

SynchroGrid provided quality relay setting development services by creating new settings for relays at five substations for a Texas utility.

This project consisted of verifying the adequacy and reliability of new features and settings along with existing settings within the firmware upgrade.

SynchroGrid developed a DFR solution to monitor reactor inrush currents. This will enable CTT to build a database of waveform signals to analyze and detect abnormal conditions.

SynchroGrid performed extensive calculations for wind farms across Canada to ensure that their relay settings were in compliance with a number of NERC-PRC standards.

SynchroGrid created an innovative process that has simplified the verification of generator protective relays for NERC PRC-025 compliance. 

SynchroGrid provided quality system protection services in developing settings for a number of local terminals including Enterprise, TAMU, and Dowling terminals.

SynchroGrid provided a relay settings review for the ERCOT Region. This was for ERCOT RARF 5.4.

SynchroGrid provided relay settings and GOOSE messaging review along with quality control for Cross Texas Transmission's Gray shunt reactor upgrades.

SynchroGrid provided relay settings and GOOSE messaging review along with quality control for Cross Texas Transmission's Gray to Allen Creek line additions.

SynchroGrid provided relay settings and GOOSE messaging review along with quality control for Cross Texas Transmission's Railhead reactor additions.